Category: OpenMediaVault
-
Flash Memory Plugin for OpenMediaVault
If you are installing OpenMediaVault on a Raspberry Pi chances are you are running the operating system off an SD card. SD cards are great for read only access by they will quickly wear out and die if they get a lot of writes. OMV causes a lot of write operations when generating the graphics…
-
Adding an Storage Drive and SMB Share to OpenMediaVault on Raspberry Pi
In an earlier article we installed OMV and did the most basic set up. In this article we’ll add a storage drive. This article assumes you have a Raspberry Pi 4 with OMV 6 installed and working correctly. We’ll be attaching a USB hard drive which has an NTFS partition on it. Attaching a Drive…
-
Installing OpenMediaVault (OMV) on a Raspberry Pi
OpenMediaVault (OMV) is an open source Network Attached Storage (NAS) solution. It ships as a distribution but you can also install just the packages if you have a suitable base system (Debian essentially) which is what we’ll be doing here. OMV has a web based interface that can be used to configure almost all aspects…